Nickel alloys Manuale electrode
CHEMICAL COMPONET:
ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Fe | W | Mo | P | S | |
GB/T REGULAE | 0.02 | 1.00 | 0.20 | 14.5-16.5 | ≥55 | 4.0-7.0 | 3.0-4.5 | 15.0-17.0 | 0.02 | 0.014 | |
AWS Rules | 0.02 | 1.00 | 0.20 | 14.5-16.5 | Margin | 4.0-7.0 | 3.0-4.5 | 15.0-17.0 | 0.04 | 0.03 | |
EXEMPLUM PENSI HABEO | 0.018 | 0.45 | 0.18 | 15.7 | 57.9 | 5.71 | 3.92 | 16.000 | 0.009 | 0.008 |
MACHINA proprietas:
POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
GB/T REGULAE | 400 | 690 | - | 22 | ||||
AWS Rules | - | 690 | - | 25 | ||||
EXEMPLUM PENSI HABEO | 570 | 770 | - | 40 |
PARAMETERS WELDING RECOMMENDED:
DIAMETERS SPECIFICATIONS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||
ELECTRICITY (Amp) | H/W | 69-95 | 70-115 | 95-145 | |||||
O/W* | 60-80 | 65-105 | 85-135 |
Minimum hydrogenii genus manu electrode, compositio nominalis (pondus percent) est 57Ni-16Mo-15.5cr-5.5Fe-4W-low C, nickel-chrome-molybdenum mixtura electrode.
Praeclara corrosio resistentiae, praesertim pituitae corrosionis et resistentiae rimae corrosionis.
Arcus stabilis, pulchra formans, parum adipiscing, facilis recrementum remotionis, bona porositas resistentia, proprietas mechanica metalli fusilis stabilis est.
Tianshu Xing, magna gasi naturalis liquefacta (LNG) tabellarius cum 174,000 metrorum cubicorum aedificata est ut arcus.
-
Sanmen nuclei Planta
-
Haman Huasheng phenol recuperare turrim
CHEMICAL COMPONET:
ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Fe | W | Mo | P | S | |
GB/T REGULAE | 0.02 | 1.00 | 0.20 | 14.5-16.5 | ≥55 | 4.0-7.0 | 3.0-4.5 | 15.0-17.0 | 0.02 | 0.014 | |
AWS Rules | 0.02 | 1.00 | 0.20 | 14.5-16.5 | Margin | 4.0-7.0 | 3.0-4.5 | 15.0-17.0 | 0.04 | 0.03 | |
EXEMPLUM PENSI HABEO | 0.018 | 0.45 | 0.18 | 15.7 | 57.9 | 5.71 | 3.92 | 16.000 | 0.009 | 0.008 |
MACHINA proprietas:
POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
GB/T REGULAE | 400 | 690 | - | 22 | ||||
AWS Rules | - | 690 | - | 25 | ||||
EXEMPLUM PENSI HABEO | 570 | 770 | - | 40 |
PARAMETERS WELDING RECOMMENDED:
DIAMETERS SPECIFICATIONS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||
ELECTRICITY (Amp) | H/W | 69-95 | 70-115 | 95-145 | |||||
O/W* | 60-80 | 65-105 | 85-135 |
Epistulam tuam hic scribe et mitte nobis