Nickel admixtis EniCrMo-X electronico electrode fabricatio data
CHEMICAL COMPONET:
ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Fe | W | Mo | V | Cu | P | S | |
GB/T REGULAE | 0.02 | 1.00 | 0.20 | 20.0-22.5 | ≥49 | 2.0-6.0 | 2.5-3.5 | 12.5-14.5 | 0.4 | 0.5 | 0.02 | 0.014 | |
AWS Rules | 0.02 | 1.00 | 0.20 | 20.0-22.5 | Margin | 2.0-6.0 | 2.5-3.5 | 12.5-14.5 | 0.35 | 0.5 | 0.03 | 0.014 | |
EXEMPLUM PENSI HABEO | 0.014 | 0.31 | 0.18 | 21.7 | 55.3 | 4.82 | 3.35 | 13.400 | 0.05 | 0.05 | 0.01 | 0.003 |
MACHINA proprietas:
POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
GB/T REGULAE | 350 | 690 | - | 22 | ||||
AWS Rules | - | 690 | - | 25 | ||||
EXEMPLUM PENSI HABEO | 530 | 749 | - | 40 |
PARAMETERS WELDING RECOMMENDED:
DIAMETERS SPECIFICATIONS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||
ELECTRICITY (Amp) | H/W | 65-95 | 70-115 | 95-145 | |||||
O/W* | 55-80 | 65-110 | 80-130 |
Minimum hydrogenii genus manu electrode, compositio nominalis (pondus percent) est 56Ni-22Cr-13Mo-4F-e-3w, electrode nickel-chrome-molybdaeni mixturae.
Arcus stabilis, pulcher formans, modicum fundens, facilis recrementum remotionis, bona raritas resistentia.
Mechanica proprietas metalli fusilis stabilis est.
-
YAMAL LNG project
-
Shandong nuclei potentia CV20
-
Hengli Petrochemical XX decies centena millia talentorum / anno expolitio et project integratio chemica
CHEMICAL COMPONET:
ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Fe | W | Mo | V | Cu | P | S | |
GB/T REGULAE | 0.02 | 1.00 | 0.20 | 20.0-22.5 | ≥49 | 2.0-6.0 | 2.5-3.5 | 12.5-14.5 | 0.4 | 0.5 | 0.02 | 0.014 | |
AWS Rules | 0.02 | 1.00 | 0.20 | 20.0-22.5 | Margin | 2.0-6.0 | 2.5-3.5 | 12.5-14.5 | 0.35 | 0.5 | 0.03 | 0.014 | |
EXEMPLUM PENSI HABEO | 0.014 | 0.31 | 0.18 | 21.7 | 55.3 | 4.82 | 3.35 | 13.400 | 0.05 | 0.05 | 0.01 | 0.003 |
MACHINA proprietas:
POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
GB/T REGULAE | 350 | 690 | - | 22 | ||||
AWS Rules | - | 690 | - | 25 | ||||
EXEMPLUM PENSI HABEO | 530 | 749 | - | 40 |
PARAMETERS WELDING RECOMMENDED:
DIAMETERS SPECIFICATIONS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||
ELECTRICITY (Amp) | H/W | 65-95 | 70-115 | 95-145 | |||||
O/W* | 55-80 | 65-110 | 80-130 |
Epistulam tuam hic scribe et mitte nobis