Nickel admixtis Manuale electrode
CHEMICAL COMPONET:
| ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Fe | Nb+Ta | P | S | |
| GB/T REGULAE | 0.10 | 5.0-10.0 | 1.00 | 13.0-17.0 | ≥60 | 10.00 | 1.0-3.5 | 0.02 | 0.014 | |
| AWS Rules | 0.10 | 5.0-9.5 | 1.00 | 13.0-17.0 | ≥59 | 10.00 | 1.0-2.5 | 0.03 | 0.014 | |
| EXEMPLUM PENSI HABEO | 0.041 | 7.6 | 0.45 | 15.7 | 15.7 | 3.56 | 1.76 | 0.005 | 0.004 | |
MACHINA proprietas:
| POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
| GB/T REGULAE | 360 | 550 | - | 27 | ||||
| AWS Rules | - | 550 | - | 30 | ||||
| EXEMPLUM PENSI HABEO | 410 | 650 | - | 40 | ||||
PARAMETERS WELDING RECOMMENDED:
| DIAMETERS SPECIFICATIONS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||||
| ELECTRICITY (Amp) | H/W | 69-95 | 70-115 | 95-145 | |||||||
| O/W* | 55-80 | 65-110 | 80-130 | ||||||||
Minimum hydrogenii genus manu electrode, compositio nominalis (pondus percent) est 65Ni-15Cr-8Fe-7.5Mn-2Nb+Ta, ad mixturam electrode nickel-chrome-ferrei.
Ob summam offensionis materiam, caliditas fortitudinis et oxidationis habet resistentiam et temperaturas ab humili temperie ad 480℃ accommodare potest.
Arcus stabilis, pulchra formans, parum adipiscing, facilis recrementum remotionis, bona porositas resistentia, proprietas mechanica metalli fusilis stabilis est.
-
300,000-ton contra ipsam Curabitur productio et at Tanker (FPSO)
Harbin electrica tres ianuam CMT
-
Zhejiang Satellite Energy 3× 60,000 m³LPG repono tank
CHEMICAL COMPONET:
| ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Fe | Nb+Ta | P | S | |
| GB/T REGULAE | 0.10 | 5.0-10.0 | 1.00 | 13.0-17.0 | ≥60 | 10.00 | 1.0-3.5 | 0.02 | 0.014 | |
| AWS Rules | 0.10 | 5.0-9.5 | 1.00 | 13.0-17.0 | ≥59 | 10.00 | 1.0-2.5 | 0.03 | 0.014 | |
| EXEMPLUM PENSI HABEO | 0.041 | 7.6 | 0.45 | 15.7 | 15.7 | 3.56 | 1.76 | 0.005 | 0.004 | |
MACHINA proprietas:
| POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
| GB/T REGULAE | 360 | 550 | - | 27 | ||||
| AWS Rules | - | 550 | - | 30 | ||||
| EXEMPLUM PENSI HABEO | 410 | 650 | - | 40 | ||||
PARAMETERS WELDING RECOMMENDED:
| DIAMETERS SPECIFICATIONS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||||
| ELECTRICITY (Amp) | H/W | 69-95 | 70-115 | 95-145 | |||||||
| O/W* | 55-80 | 65-110 | 80-130 | ||||||||
