High Carbon steels Manual electrode E9016-G Sigillum datae
Apta est ad mixturam ferri demissae mixturae, et medium carbo carbonis eiusdem gradus fortitudinis.
Vexillum occurrit: GB/T32533 E5916-G P, AWS A5.5 E9016-G & A5.5M E6216-G, ISO256018275-A, ISO 18275-B: E6216-G P.
Quid sunt?
moribus?
●Minimum consectetuer dui electrode.
●Arcus stabilis, parva adipiscing.
●Forma pulcherrima.
●Stabula mechanica.
Product Parameter
CHEMICAL COMPONET:
ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
GB/T REGULAE | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | - | - | ≥0.10 |
AWS Rules | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | 0.035 | 0.030 | ≥0.10 |
EXEMPLUM PENSI HABEO | 0.07 | 1.55 | 0.38 | 0.03 | 0.70 | 0.31 | 0.012 | 0.006 | 0.001 |
MACHINA proprietas:
POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | HEATTREAMENT℃xh | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
GB/T REGULAE | 490 | 590 | 620*1 | 27/-20 | 16 | ||||
AWS Rules | 530 | 620 | 620*1 | - | 17 | ||||
EXEMPLUM PENSI HABEO | 570 | 660 | 620*1 | 150/-30 | 27 |
PARAMETERS WELDING RECOMMENDED:
DIAMETERS SPECIFICATIONS(mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | |||||
ELECTRICITY (Amp) | H/W | 80-110 | 110-130 | 130-180 | 180-230 | ||||
O/W* | 50-80 | 90-120 | 130-160 | - |
Vide in via
transportamus
●Motor transport
●Shipping
Vide at
nos wareouse
Incepta
nos involvunt
●Harbin Electric - Sanmen, Haiyang MSR
●Oleum Sichuan constructionis Lunnan Base
Nostra products
ad mundum
CHEMICAL COMPONET:
ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
GB/T REGULAE | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | - | - | ≥0.10 |
AWS Rules | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | 0.035 | 0.030 | ≥0.10 |
EXEMPLUM PENSI HABEO | 0.07 | 1.55 | 0.38 | 0.03 | 0.70 | 0.31 | 0.012 | 0.006 | 0.001 |
MACHINA proprietas:
POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | HEATTREAMENT℃xh | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
GB/T REGULAE | 490 | 590 | 620*1 | 27/-20 | 16 | ||||
AWS Rules | 530 | 620 | 620*1 | - | 17 | ||||
EXEMPLUM PENSI HABEO | 570 | 660 | 620*1 | 150/-30 | 27 |
PARAMETERS WELDING RECOMMENDED:
DIAMETERS SPECIFICATIONS(mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | |||||
ELECTRICITY (Amp) | H/W | 80-110 | 110-130 | 130-180 | 180-230 | ||||
O/W* | 50-80 | 90-120 | 130-160 | - |
Epistulam tuam hic scribe et mitte nobis