High Carbon steels Manual electrode E12018-G Data
Applicationem
Eadem vi in fabricandis machinamentis admisceris chalybis infixis apta glutino.
Vexillum occurrit: GB/T32533 E8318-G, AWS A5.5 E12018-G & A5.5M E8318-G, ISO18275-A, ISO 18275-B: E8318-A.
CHEMICAL COMPONET:
ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | V |
GB/T REGULAE | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | - | - | - | ≥0.10 |
AWS Rules | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | 0.030 | 0.030 | ≥0.20 | 0.08 |
EXEMPLUM PENSI HABEO | 0.093 | 1.73 | 0.34 | 0.63 | 2.32 | 0.01 | 0.01 | 0.006 | 0.011 | 0.003 |
MACHINA proprietas:
POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | HEATTREAMENT℃xh | IMAPACT VALEO J/℃ | PROLATIO(%) | |||||
GB/T REGULAE | 740 | 830 | AW | - | 12 | |||||
AWS Rules | 740 | 830 | AW | - | 14 | |||||
EXEMPLUM PENSI HABEO | 835 | 885 | AW | 53/-50 | 17 |
PARAMETERS WELDING RECOMMENDED:
DIAMETERS SPECIFICATIONS(mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | ||||||
ELECTRICITY (Amp) | H/W | 80-110 | 100-130 | 130-180 | 180-230 | |||||
O/W* | 50-80 | 90-120 | 130-160 | - |
Peculiaritas
Ferrum pulveris humilis hydrogenii potassium manu electrode, altum liquefactionem efficientiam, optimum low temperatura dapibus effectus.
Arcus stabilis, tabulae parvae, corona bona, facile de-slagging.
Optimum X-radius effectus, stabilis mechanica effectus.
Monstra singula
Arcus stabilisation
Pulchra figura
De nobis
Factory fioor ostentationem
Applicationem causa
Haiyang nuclei plantae
Sina et Russia ante orientem
Ipsam officinam dirigentes
CHEMICAL COMPONET:
ADMISSUS (wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | V |
GB/T REGULAE | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | - | - | - | ≥0.10 |
AWS Rules | - | ≥1.00 | ≥0.80 | ≥0.30 | ≥0.50 | ≥0.20 | 0.030 | 0.030 | ≥0.20 | 0.08 |
EXEMPLUM PENSI HABEO | 0.093 | 1.73 | 0.34 | 0.63 | 2.32 | 0.01 | 0.01 | 0.006 | 0.011 | 0.003 |
MACHINA proprietas:
POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | HEATTREAMENT℃xh | IMAPACT VALEO J/℃ | PROLATIO(%) | |||||
GB/T REGULAE | 740 | 830 | AW | - | 12 | |||||
AWS Rules | 740 | 830 | AW | - | 14 | |||||
EXEMPLUM PENSI HABEO | 835 | 885 | AW | 53/-50 | 17 |
PARAMETERS WELDING RECOMMENDED:
DIAMETERS SPECIFICATIONS(mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | ||||||
ELECTRICITY (Amp) | H/W | 80-110 | 100-130 | 130-180 | 180-230 | |||||
O/W* | 50-80 | 90-120 | 130-160 | - |
Epistulam tuam hic scribe et mitte nobis