Electrode EcuNi Welding accessiones aeris admixtis Manuale
Applicationem
Maxime usus est ad mixturam aeris 70-30 nickel stannum vel 70-30 aeris nickel mixturae /645-Ⅲ metallum compositum et 70-30 nickel stannum aeris sicut cladding, vulgo in structurarum machinarum oceani, ut desalinationis fabrica, marinis. tractandi ratio, evaporator, condensator, etc.
Ferrum etiam pro 645-Ⅲ ad usum basin metallici compositi structura; Potest etiam adhiberi in admixtionibus aeris 90/10-nickel.
CHEMICAL COMPONET:
| ADMISSUS (wt%) | C | Mn | Si | Ni | Fe | Ti | Cu | P | S | |
| GB/T REGULAE | - | 2.50 | 0.50 | 29.0-33.0 | 2.50 | 0.50 | Margin | 0.02 | 0.014 | |
| AWS Rules | - | 1.0-2.5 | 0.50 | 29.0-33.0 | 0.40-0.75 | 0.50 | Margin | 0.02 | 0.014 | |
| EXEMPLUM PENSI HABEO | 0.01 | 1.45 | 0.3 | 30.4 | 0.65 | 0.1 | 67 | 0.093 | 0.004 | |
MACHINA proprietas:
| POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
| GB/T REGULAE | - | 350 | - | 20 | ||||
| AWS Rules | - | 350 | - | 20 | ||||
| EXEMPLUM PENSI HABEO | 316 | 435 | - | 36.5 | ||||
PARAMETERS WELDING RECOMMENDED:
| DIAMETERS SPECIFICATIONS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||||
| ELECTRICITY (Amp) | H/W | 80-120 | 100-150 | 140-180 | |||||||
| O/W* | 70-110 | 90-135 | - | ||||||||
Peculiaritas
Electrode Cu70-Ni30 offensionis est ut nucleus glutino, efficiens series hydrogenii minoris electrodis aeris-nickel.
Minimum contentum elementorum residuarum (S, P, Pb, Sn et Zn, etc.), bonum crepuit resistentia
Contentum Mn Ti- opportune augetur, et rimas thermarum et poros determinatur.
Monstra singula
Bonum vox resistentia
Scelerisque rimis et poris suppressione limitata
De nobis
Factory fioor ostentationem
Applicationem causa
Interior Mongolia Xinao Energy Co., LTD. III * 3000m³ humilis temperatus sphaericum tank
Shandong Zibo Haiyi 8 ponit 3000m³ propylene sphaericae tank
Ipsam officinam dirigentes
CHEMICAL COMPONET:
| ADMISSUS (wt%) | C | Mn | Si | Ni | Fe | Ti | Cu | P | S | |
| GB/T REGULAE | - | 2.50 | 0.50 | 29.0-33.0 | 2.50 | 0.50 | Margin | 0.02 | 0.014 | |
| AWS Rules | - | 1.0-2.5 | 0.50 | 29.0-33.0 | 0.40-0.75 | 0.50 | Margin | 0.02 | 0.014 | |
| EXEMPLUM PENSI HABEO | 0.01 | 1.45 | 0.3 | 30.4 | 0.65 | 0.1 | 67 | 0.093 | 0.004 | |
MACHINA proprietas:
| POSSESSIO | VICTORITAS (MPa) | PROLATIO VIS (MPa) | IMAPACT VALEO J/℃ | PROLATIO(%) | ||||
| GB/T REGULAE | - | 350 | - | 20 | ||||
| AWS Rules | - | 350 | - | 20 | ||||
| EXEMPLUM PENSI HABEO | 316 | 435 | - | 36.5 | ||||
PARAMETERS WELDING RECOMMENDED:
| DIAMETERS SPECIFICATIONS(mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||||
| ELECTRICITY (Amp) | H/W | 80-120 | 100-150 | 140-180 | |||||||
| O/W* | 70-110 | 90-135 | - | ||||||||
